Water pressure must be between 50 kPa and 800 kPa (0.5 – 8.0 kgf/cm²). If the water pressure is more than 800 kPa, a decompression device should be installed.
Periodically check the condition of the water supply hose and replace the water supply hose if necessary.
If the water pressure is near or over 800 kPa, a water pressure reduction device should be installed to both taps.
Exceeding 65 ℃ can damage some clothes.
Temperatures below 4 ℃ can cause hoses to freeze and burst and unfavourable wash results due to undissolved detergent.
Cold inlet Water Temperatures over 25 ℃ can cause damage to clothes such as delicate Woollens
Do not overtighten the water supply hose or use mechanical devices to tighten onto the inlet valves.
No further backflow protection is required for connection to the water inlet.